02-14-2020, 12:22 AM
Introduction
The filling machine is designed and manufactured by using the principle of isobaric filling with the introduction of German technology from our country to realize the filling of liquid into the washed bottle sent by the flask machine.
The filling valve adopts the isobaric mechanical valve, the filling is quick and sensitive, and the filling level accuracy is high.
In order to ensure the accurate sealing between the bottle mouth and the filling valve, the lifting cylinder belt alignment structure is adopted in the center guide, and the phenomenon of material leakage from the bottle mouth is reduced.
The main transmission adopts the gear drive or open combined drive, which has high efficiency, low noise, long life, convenient maintenance and full lubrication. The main motor speed of the machine is controlled by frequency converter, and step less frequency conversion is adopted in this machine.
Main machine list
No.Product nameTypeQuantity
1Beverage mixing machineQHS(15T)1 set
2Washing, filling and capping 3-in-1 machine60-60-15(D)1 set
3Bottle warm machineWP-21 set
4Drying machineCG-22 set
5Sleeve Labeling machine
(include steam boiler and shrink tunnel)SPC-1501set
6Code printing machine 1 set
7Hot shrink packing machineD-A50001set
8Pallet packing machineJ-2100-B1set
9Chain Conveyor systemChain(5M free)1M
10Pneumatic conveyorPneumatic(3M free)1M
Qualification：
NOHeadingoccupation standardIndex
1Scouring rate100%100％
2Filling level error±12mm±4mm
3Bottle loss rate≤0.2％≤0.08％
4Cap loss rate ≤0.5％
5Liquid loss rate≤0.5％≤0.3％
6Cap air tightness qualification rate100％100％
7Screw cover moment0.6N 2.8N m adjustableFluctuation range ±15%
Technical features:
Guide bottle system, simple structure, can be quickly and conveniently change according to the bottle type, the whole machine adopts the bottleneck structure transport.
PLC automatic control, fault online display, such as bottle plugging, missing cap, etc.
The liquid level of the material in the filling cylinder is automatically controlled by 4-20mA analog quantity, and the opening degree of the film valve is controlled after the liquid level sensor detects the liquid level, which ensures the stability of the liquid level and the reliability of the filling.
The key parts and electrical components of this machine are imported products.
After-sales service
(1) We can dispatch our engineer(s) to your side for installing and debugging machines, but our engineer(s) traveling allowances (USD120/day/person), as well as lodging and board expenses, shall be charged at your side.
(2) The machine quality that we sell is guaranteed 1 year.
(3) We shall provide your side spare accessories for easy-damaged parts within warranty year and long time technical support.
FAQ
Q1：Can we trust you？
Q1：Of course you can, we have more than 10 years of filler manufacturing experience, has been walking in front of the industry. The mechanical parts We use are also produced by major international companies, with the careful creation of engineers and workers, so the quality of the equipment can be assured.
Q2: Are you a trading company or a manufactory?
A2: We are a manufactory, we supply the factory price with good quality, welcome to visit !
Q3: What is your guarantee or the warranty of the quality if we buy your machines?
A3: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q4: How can I install my machine when it arrives?
A4: If need we will send our engineers to your factory to install the machines and train your staff how to operate the machines.
Q5：What is the payment method?
A5：You can use L/C, T/T, D/P to pay for your purchase.Carbonated Beverage Filling Machine price
website:http://www.beveragepack.com/filling-machine/carbonated-beverage-filling-machine/
The filling machine is designed and manufactured by using the principle of isobaric filling with the introduction of German technology from our country to realize the filling of liquid into the washed bottle sent by the flask machine.
The filling valve adopts the isobaric mechanical valve, the filling is quick and sensitive, and the filling level accuracy is high.
In order to ensure the accurate sealing between the bottle mouth and the filling valve, the lifting cylinder belt alignment structure is adopted in the center guide, and the phenomenon of material leakage from the bottle mouth is reduced.
The main transmission adopts the gear drive or open combined drive, which has high efficiency, low noise, long life, convenient maintenance and full lubrication. The main motor speed of the machine is controlled by frequency converter, and step less frequency conversion is adopted in this machine.
Main machine list
No.Product nameTypeQuantity
1Beverage mixing machineQHS(15T)1 set
2Washing, filling and capping 3-in-1 machine60-60-15(D)1 set
3Bottle warm machineWP-21 set
4Drying machineCG-22 set
5Sleeve Labeling machine
(include steam boiler and shrink tunnel)SPC-1501set
6Code printing machine 1 set
7Hot shrink packing machineD-A50001set
8Pallet packing machineJ-2100-B1set
9Chain Conveyor systemChain(5M free)1M
10Pneumatic conveyorPneumatic(3M free)1M
Qualification：
NOHeadingoccupation standardIndex
1Scouring rate100%100％
2Filling level error±12mm±4mm
3Bottle loss rate≤0.2％≤0.08％
4Cap loss rate ≤0.5％
5Liquid loss rate≤0.5％≤0.3％
6Cap air tightness qualification rate100％100％
7Screw cover moment0.6N 2.8N m adjustableFluctuation range ±15%
Technical features:
Guide bottle system, simple structure, can be quickly and conveniently change according to the bottle type, the whole machine adopts the bottleneck structure transport.
PLC automatic control, fault online display, such as bottle plugging, missing cap, etc.
The liquid level of the material in the filling cylinder is automatically controlled by 4-20mA analog quantity, and the opening degree of the film valve is controlled after the liquid level sensor detects the liquid level, which ensures the stability of the liquid level and the reliability of the filling.
The key parts and electrical components of this machine are imported products.
After-sales service
(1) We can dispatch our engineer(s) to your side for installing and debugging machines, but our engineer(s) traveling allowances (USD120/day/person), as well as lodging and board expenses, shall be charged at your side.
(2) The machine quality that we sell is guaranteed 1 year.
(3) We shall provide your side spare accessories for easy-damaged parts within warranty year and long time technical support.
FAQ
Q1：Can we trust you？
Q1：Of course you can, we have more than 10 years of filler manufacturing experience, has been walking in front of the industry. The mechanical parts We use are also produced by major international companies, with the careful creation of engineers and workers, so the quality of the equipment can be assured.
Q2: Are you a trading company or a manufactory?
A2: We are a manufactory, we supply the factory price with good quality, welcome to visit !
Q3: What is your guarantee or the warranty of the quality if we buy your machines?
A3: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q4: How can I install my machine when it arrives?
A4: If need we will send our engineers to your factory to install the machines and train your staff how to operate the machines.
Q5：What is the payment method?
A5：You can use L/C, T/T, D/P to pay for your purchase.Carbonated Beverage Filling Machine price
website:http://www.beveragepack.com/filling-machine/carbonated-beverage-filling-machine/