01-09-2020, 04:51 PM
Loosen, push, tighten: Take the TV off the wall, loosen the bolts holding the arms on the back of the TV, then push up/down on the arms as you tighten them back down. Put the TV back on the wall and see if it’s level. If it isn’t, then do the same thing with the wall plate. Improvise: If you used up all of the wiggle room available and it still isn’t level, make more wiggle room. You can use the step drill bit we talked about earlier to round out the holes in the arms or wall plate. This may give you the little extra space needed; just don’t go too crazy and make the holes unusable. If you accidentally make the holes so big that bolts slip through, you can always buy larger washers.